A corded chainsaw frees you from fuel mixing, battery anxiety, and the warmup ritual of a two-stroke engine. The trade-off is the cord, which rewards anyone who plans their cuts around a reachable outlet or owns a heavy-gauge extension. The picks below span the raw power end and the practical accessory side, so you can build a setup that handles thick hardwood, routine pruning, or demolition without burning through batteries.
Your Options, Compared
EZUVITA 15-Inch Arc Curved Reciprocating Saw Blades Set
EZUVITA 9.5-Inch 6-Piece Wood Pruning Blade Set
EZUVITA 9.5-Inch Arc Curved Reciprocating Saw Blades Set
EZUVITA 25-Piece Jigsaw Blades Set with Storage Case
BLACK+DECKER LP1000 Lopper Chain Saw 4.5-Amp
Milwaukee 2727-20 M18 FUEL 16 in. Chainsaw (Tool Only)
Makita XCU03PT1 36V Brushless 14″ Chain Saw Kit
EZUVITA 36-Piece Reciprocating Saw Blade Set
EZUVITA 7 Amp Corded Reciprocating Saw
Long, curved reciprocating blades earn their place when firewood rounds get fat or limbs reach higher than your shoulder. This set stretches to 15 inches with a roughly 350 mm working length, so a single plunge clears deeper wood than the 9-inch sets you’ll meet later in this list. The arc profile pulls the cutting edge through the kerf (the slot the blade cuts) faster, which matters on dense, sappy green wood where a straight blade stalls.
For anyone burning through storm cleanup or processing rounds up to about 320 mm across, the extra reach translates directly into fewer repositioning stops. Landscapers and rural property owners tend to appreciate that the most.
Notable Gains
- 15-inch curved blades reach deeper into logs than standard 9-inch sets.
- 5 TPI tooth spacing (five teeth per inch) clears chips fast in wet or fibrous wood.
- Arced geometry keeps the cut moving instead of chattering in dense stock.
- Comes with a storage box so the blades stay organized between projects.
- Five blades in the set give you spares on hand for big cleanup days.
Things To Consider
- The 15-inch length is overkill for small branch work; you’ll want a shorter set alongside it.
- Curved blades can feel unwieldy in tight spaces like inside a gutted shed wall.
Quick Facts
Who Should Grab It
Rural homeowners and firewood processors who regularly tackle logs too thick for a 9-inch blade.
Skip It When
EZUVITA’s 9.5-Inch 6-Piece Wood Pruning Blade Set handles small limbs better if you mostly prune.
Compared to the 15-inch curved set above, this kit goes the opposite direction: shorter, tougher, and built to outlast the cheaper blades most people buy. The 9.5-inch length is just a hair longer than the common 9-inch reciprocating blade, so it reaches a little deeper without losing maneuverability in tight cuts.
Chromium-vanadium steel (a tough alloy used in professional-grade hand tools) gives the teeth the resilience to stay sharp through repeated contact with knots and gritty bark. Gardeners and weekend woodworkers who treat pruning as a recurring chore rather than a one-off job tend to find this set pays for itself through longer blade life.
Advantages To Know
- Chrome-vanadium steel resists wear far better than standard carbon blades.
- The 9.5-inch length adds useful depth over common 9-inch blades.
- Six blades mean you can rotate while dulling, keeping cuts efficient.
- Designed for both dry and wet wood, so green limbs are no problem.
Points To Note
- Limited to wood and pruning. Metal cutting requires a different tooth pattern.
- Six pieces without a labeled case, so storing them organized takes a little effort.
Best Suited To
Homeowners managing regular tree maintenance who want blades that survive more than a season.
Look Elsewhere When
EZUVITA’s 36-Piece Reciprocating Saw Blade Set covers both metal and wood if you cut more than just branches.
Where the first pick goes long for firewood rounds, this set shrinks the same arc-curved idea into a 9.5-inch package sized for backyard tree work. The curve still drives the tooth through the kerf aggressively, so green wood up to about 180 mm in diameter doesn’t bog the blade down.
Anyone pruning apple trees, clearing storm-fallen branches, or maintaining ornamental shrubs will find this length lands in the sweet spot. Compare it to the longer 15-inch set above, and the trade-off is obvious: less reach, much easier control at shoulder height and above.
What Pays Off
- Arc-curved geometry cuts faster than straight blades on round wood.
- 240 mm total length fits reciprocating saws from major brands without modification.
- 5-piece set ships with a storage box for clean transport.
- Reaches 210 mm into the cut, plenty for most backyard branches.
Worth Bearing In Mind
- The curved shape makes flush cuts against walls harder than straight blades.
- Not built for metal, so demolition jobs need a different blade.
Right Fit For
Suburban gardeners pruning fruit trees, hedges, and small storm debris between full-on firewood seasons.
A Better Fit Elsewhere
EZUVITA’s 15-Inch Arc Curved Set handles larger logs if your property regularly drops heavy limbs.
Stepping away from chainsaws and reciprocating blades, this jigsaw set rounds out a workshop that needs precision cuts alongside heavy work. Twenty-five blades across eight profiles cover straight cuts in wood, curves in plastic, and clean lines in thin metal. Anyone building a planter, trimming a laminate floor, or cutting a sink opening benefits from having the right tooth pattern in the drawer.
The included storage case means the blades stop rattling loose in a junk drawer. For a DIYer running a single jigsaw through weekend projects, that organization alone makes the set worth considering.
Features That Help
- Eight blade profiles handle wood, plastic, and metal in the same kit.
- Storage case keeps every blade indexed and ready.
- Covers both straight cuts and tight curves with the right T-shank fit.
Trade Offs
- Some profiles duplicate function, so you may never touch every blade.
- Not designed for thick metal; thin sheets and pipes are the realistic ceiling.
Whose Shelf It Belongs On
Hobbyist woodworkers and homeowners who already own a jigsaw and want a complete spare-blade library.
Reach For A Different Pick When
EZUVITA’s 36-Piece Reciprocating Saw Blade Set covers heavier demolition that a jigsaw simply cannot.
The LP1000 is a different animal from the chainsaws and blades on this list: it is essentially powered loppers. You clamp the jaws around a branch, squeeze the trigger, and the 6-inch bar and chain scissor through wood up to about 4 inches thick. For anyone trimming overhead limbs from the safety of the ground, that grab-and-cut motion removes the awkward balancing act of a full-size chainsaw.
The 4.5-amp motor has enough torque for routine yard work but won’t pretend to fell a tree. Older homeowners, anyone avoiding ladder time, and people managing orchard trees tend to find this format easier than wrestling a top-handle saw above their head.
The Upside
- Clamping jaws hold the branch steady, so one hand effectively guides the cut.
- Reaches limbs up to about 4 inches thick without a ladder.
- 4.5-amp motor delivers consistent power on standard household circuits.
- 6-inch bar keeps the tool light enough for extended overhead use.
Points To Keep In Mind
- Corded design limits reach; you’ll need a quality outdoor extension cord.
- Not suited for felling or bucking (cutting felled logs into shorter sections); the bar is too short.
- Chain oiling is manual, so maintenance matters for long bar life.
Made For
Homeowners pruning overhead branches safely from the ground without hauling out a full chainsaw.
Swap It Out When
Makita’s XCU03PT1 cordless chainsaw kit handles bigger limbs if you cut more than lopper-thick wood.
Milwaukee’s M18 FUEL line targets users who already live inside the M18 battery ecosystem and want pro-grade cutting without gas. The 16-inch Oregon bar (a well-regarded brand of chainsaw cutting bar and chain) and brushless motor deliver torque comparable to small gas saws, with the convenience of a battery swap. Note this is the tool-only version, so you’ll need M18 batteries and a charger to actually run it.
Contractors, tree-care crews, and serious rural owners tend to gravitate toward this saw because the variable-speed trigger gives real control on delicate cuts. Compared to the corded options earlier in this list, you trade unlimited runtime for genuine portability.
Why It Works Well
- Brushless motor maintains power under load, similar to a 30-40cc gas saw.
- 16-inch bar handles felling small trees and bucking larger rounds.
- Variable-speed trigger offers precise control on entry cuts.
- Automatic oiler keeps the chain lubricated without manual stops.
- Compatible with every M18 battery in your collection.
Honest Caveats
- Battery and charger are not included, raising the real cost for new M18 owners.
- Higher-capacity batteries noticeably improve performance, so smaller packs underdeliver.
- Heavier than corded options due to battery mass.
Core Details
Perfect Match For
Pros and rural homeowners already invested in Milwaukee M18 batteries who want gas-like cutting without fuel.
Not Your Match When
The Makita XCU03PT1 kit ships with batteries if you’d rather start cutting immediately.
The Makita XCU03PT1 uses two 18V batteries in series to produce 36V of cutting power, putting its brushless motor roughly on par with a 32cc gas chainsaw. The kit ships with four 5.0Ah batteries, which means you can rotate through cuts all day without sitting idle on a charger. Landscapers and contractors who run cordless tool platforms tend to prize that kind of continuous workflow.
A 14-inch bar sits between the BLACK+DECKER LP1000 lopper and the Milwaukee 16-inch saw. For limbing, brush clearing, and storm cleanup around a property, that bar length lands in a versatile middle ground. Tool-less chain adjustment speeds up field maintenance, and the lock-off lever reduces accidental startups.
What Helps Most
- Four 5.0Ah batteries extend runtime well beyond a single afternoon of work.
- Variable-speed trigger and 3,940 FPM (feet per minute) chain speed handle dense wood.
- Tool-less chain adjustment simplifies tensioning in the field.
- Auto power-off preserves battery life when the saw sits idle.
- Lock-off lever prevents accidental chain engagement.
Small Caveats
- 14-inch bar is shorter than some felling jobs demand.
- Brushless direct-drive system makes the motor non-serviceable by the owner.
- Batteries add weight compared to a bare-tool configuration.
Feature Card
Built With In Mind
Landscaping crews and property owners who already use Makita LXT batteries and need a reliable trim saw.
Consider Something Else When
Milwaukee’s 2727-20 with a 16-inch bar tackles felling if your work involves bigger trees.
While the chainsaws above focus on raw cutting power, this 36-piece blade set focuses on versatility. Eleven metal-cutting blades cover thin-gauge steel, sheet metal, and pipes, while twenty-three wood blades handle everything from rough demolition to clean pruning. Two pruning blades round out the kit for limbing work.
For anyone who already owns a reciprocating saw and bounces between projects like re-plumbing a bathroom, breaking down a deck, and trimming a tree, having every tooth pattern in one organizer pouch removes the “wrong blade” problem entirely. The pouch keeps everything visible, so grabbing the right TPI (teeth per inch) is a quick glance rather than a dig through a drawer.
Practical Advantages
- 36 blades across metal, wood, and pruning mean one kit covers most projects.
- Organizer pouch keeps every blade visible and accessible.
- Range of TPI options lets you match aggression to material density.
Where It Is Less Suited
- Some redundancy across blade profiles means you may not use every piece.
- No specialized masonry blades, so brick and concrete need a separate purchase.
Right Fit For
Homeowners and remodelers who want a single blade kit covering plumbing, demolition, and yard cleanup.
Another Choice May Suit
EZUVITA’s 25-Piece Jigsaw Set fits tighter curves if most of your cuts need finesse over speed.
For shoppers who want a saw instead of a blade, this 7-amp corded reciprocating saw anchors the bottom of the list with genuine utility. The 1-1/8-inch stroke length and 2,800 SPM (strokes per minute) deliver the kind of steady cutting speed that corded tools are known for. No battery sag, no fuel mixing: just plug into a standard outlet and start cutting.
The pivoting front shoe lets you adjust cutting depth by sliding the shoe along the blade without tools, which speeds up repetitive work like PVC trimming or wood notching. Pair this saw with the 36-piece EZUVITA blade set above and you’ve covered most homeowner-grade cutting tasks at a sensible price point.
Everyday Wins
- 7-amp motor provides consistent cutting power without battery fade.
- 2,800 SPM handles wood, metal, and PVC without slowing noticeably.
- Tool-free pivoting shoe speeds up depth adjustments on the fly.
- Corded design means no battery investment on top of the tool cost.
Small Limitations
- Cord limits mobility to the reach of your extension cord.
- Lacks the deep-cutting bar length of full-size chainsaws for felling work.
Feature Snapshot
Who It Suits Best
DIYers and homeowners who want a reliable corded reciprocating saw for remodeling, pruning, and odd jobs.
Where Another Pick Suits Better
BLACK+DECKER’s LP1000 lopper fits overhead branch work better if your cuts are mostly above shoulder height.
Picking The Right Saw And Blades For Your Work
Matching a chainsaw or blade set to your real workload matters more than chasing the biggest motor on paper. Start by defining the typical material you’ll cut: dry firewood rounds, green limbs, demolition lumber, or sheet metal all pull you toward different blade profiles.
Bar length is the next decision point. A 14 to 16-inch bar covers most homeowner felling and bucking, while a 6-inch bar on a lopper or a short reciprocating saw handles overhead pruning without ladder risks. Tooth count (TPI) drives cut quality and speed: lower TPI bites aggressively for fast rough cuts, higher TPI leaves cleaner edges in finished work.
Power source changes everything about how you work. Corded saws deliver unlimited runtime but tether you to an outlet, while cordless platforms trade away that tether for battery weight and charging logistics. For property owners with a long extension cord and a defined work zone, corded still wins on cost and torque. For anyone chasing mobility across a large yard or jobsite, M18 or LXT battery platforms are hard to beat.
Blade steel matters more than most people realize. Chrome-vanadium and similar alloys hold an edge through gritty bark and occasional nail contact far longer than basic carbon steel. If you cut regularly, that durability shows up in fewer blade swaps and cleaner cuts over the life of the saw.
Smart Choices When Shopping This Category
Wrong Turns To Avoid
Picking a chainsaw by bar length alone overlooks the more important question: what material dominates your workload? A 16-inch bar on a saw with a low-TPI wood chain will frustrate anyone trying to slice clean sheet metal. Match the blade profile to the job before chasing a longer bar.
Another common trap is buying a tool-only cordless chainsaw without checking the battery cost. M18 and LXT platforms deliver excellent performance, but a bare tool plus batteries and a charger often exceeds the cost of a complete corded kit. Newcomers to a battery platform should price the full system before committing.
Where The Extra Money Goes
Premium models in this category invest in brushless motors, longer bar-and-chain life, and tool-free adjustments. Brushless electronics in particular extend motor life and squeeze more runtime from each battery charge. The trade-off is a higher sticker price that only pays off under heavy use. For occasional yard work, a brushed motor still gets the job done without the extra cost.
Frequently Asked Questions
What bar length handles most homeowner chainsaw tasks?
A 14 to 16-inch bar covers the majority of residential cutting, from limbing fallen branches to bucking fireplace rounds. Anything shorter suits pruning at height; anything longer earns its place on rural acreage with mature trees.
How does corded performance compare to cordless chainsaws?
Modern brushless cordless saws match small gas engines, but corded saws still deliver consistent torque without battery sag. For long sessions near an outlet, corded wins on simplicity and cost. For mobility across a property, cordless wins on convenience.
What does TPI mean on a saw blade?
TPI stands for teeth per inch. Lower TPI cuts faster with a rougher edge, while higher TPI cuts slower with a cleaner finish. Match TPI to the material: rough wood wants low TPI, metal and finished cuts want higher TPI.
Are longer reciprocating saw blades always better?
Not necessarily. Long blades reach deeper into material but lose maneuverability in tight spaces. For most homeowner work, a 9 to 12-inch blade handles the majority of cuts without the awkwardness of a full 15-inch blade.
How important is blade steel type?
Blade steel affects edge retention and flexibility. Chrome-vanadium and bi-metal options stay sharp longer through dirty or abusive cuts, while basic carbon steel is cheaper but dulls faster under heavy use.
Final Verdict
The right pick depends on whether you need a saw or blades for a saw you already own. The EZUVITA 15-inch curved blades, Milwaukee M18 FUEL, and Makita XCU03PT1 each serve very different shoppers, from firewood processors to professional landscapers. Pair any of them with the blade sets above and you’ll have a cutting setup that handles whatever the property throws at you.